Seven "simple" manual steps to follow when painting a radiator to achieve a "smoother" finish

Seven “simple” manual steps to follow when painting a radiator to achieve a “smoother” finish

With the cost of living crisis affecting families across the country, painting yourself, without hiring a professional, is just one way to renovate a home without breaking the bank. DIY expert Michael Rowland Paint shedshared his seven steps to “successfully” paint the coolant with ease.

To paint your radiator, you will need a variety of tools including, metallic primer, metallic paint, dusting pads, and synthetic brushes. DIYers will also need to use sandpaper and a rag in addition to protective gloves.

1. Turn off the cooler

This may sound obvious, explained the DIY expert, but the first and most important step before you start painting your radiator is to make sure it is off and cool. Painting on a warm radiator will cause blistering and dripping, so make sure it has cooled completely before you begin. in drawing.”

2. Protect the areas around the radiator

Before you begin, place a dust sheet around the radiator including the floor below and secure it with some tape. The expert said to make sure it is a paint-proof type of dust plate so that the paint does not seep through or get damaged.

Michael added, “This will prevent damaging your floors, baseboards or carpeting with any accidental paint slicks or stray drops of paint. Another tip is to put some card or slip paper between the radiator and the wall, this will help protect the paint on the wall behind the radiator.”

Read more: Phil Spencer shares London’s ‘best’ commuter cities

DIYers should be sure to cover any valves or openings with tape, preferably duct tape. Then, you’re ready to clean the radiator.

3. Clean the radiator

The DIY expert continued: “It’s always a good idea to brush anything you’re about to paint to a smooth finish and that’s the same with a radiator. Clean the radiator with warm water and a mild detergent to remove any dust. You can also vacuum the radiator to make sure all dust and debris is removed before painting.”

4. Sand the file down

Take the sandpaper (120 grit), give the file a good once over to make sure you remove any unsightly lumps or bumps in the old paint. The dusting sheet should protect the floors from any debris.

5. The Prime Minister

If there is any metal exposed during the sanding process, the expert said you should apply at least one coat of metallic primer before painting with color. He added, “Make sure you research the primer you choose for metal surfaces.”

do not miss:
Christmas-flowering houseplants to ‘dispel the dullness of winter’ [COMMENT]
A ‘quick and easy’ way to clean windows for ‘streak-free’ results [INSIGHT]
An “effective” and “safe” way to get rid of aggressive English ivy [EXPLAINER]

Checkatrade also recently shared their top tips for spray painting kitchen cabinets. With the average kitchen costing £9,500 in the UK, according to the company, it’s no wonder many are choosing to make changes to their existing spaces rather than completely renovating them.

To get started, remove the cabinet doors and place them in your work area, making sure they don’t get cluttered. It can be helpful to put labels on the door so you know which locker it belongs to. Next, clean cabinet doors and cupboards with sugar soap and a lint-free cloth to remove any grease or grime.

The experts said: “Using a brush to apply primer and paint to cabinet frames, siding and paint will avoid the need for protective panels, thus saving you time. At this point, you can repair any holes or scratches using a suitable filler and putty knife. Once dry, sand everything areas you wish to paint.

Once dry, you’re ready to apply a light coat of primer to cabinets and door fronts, using either a brush or a spray gun. Checkatrade recommended using a brush for the primer, and letting it dry for the recommended time. Fabricators will then need to wipe the surface clean and apply a second coat of primer. Once it dries, it’s time to prep and fill your spray paint according to the manufacturer’s instructions.

Some paints may need to be thinned before use, so it’s worth following the instructions on the product. The experts added, “When wearing the mask, spray the edges of the door first. Next, spray any details on the doors. Next, holding the nozzle of the spray gun 10 to 12 inches from the surface of the cabinet door, sweep your entire arm back and forth to apply a light coat of Paint over the entire door.

“Any drips can be touched up lightly with a paintbrush while the paint is still wet. Allow it to dry overnight before applying a second coat to the doors. The whole process should be repeated on the other side of the door once the first side has dried.”


#simple #manual #steps #follow #painting #radiator #achieve #smoother #finish

Leave a Comment

Your email address will not be published. Required fields are marked *